Dell W-Series 207 Instant 6.5.1.0-4.3.1.0 User Guide - Page 252

When the client match feature is enabled on a W-IAP, the W-IAP measures the RF health of its associated clients. In the current release, the client match feature is supported only within a W-IAP cluster. If any of the following trigger conditions is met, clients are moved from one W-IAP to another for better performance and client experience: l Dynamic Load Balancing-Client match balances clients across W-IAPs on different channels, based on the client load on the W-IAPs and the signal to noise ration (SNR) levels the client detects from an underutilized W-IAP. If a W-IAP radio can support additional clients, the W-IAP will participate in client match load balancing and clients can be directed to that W-IAP radio, subject to the predefined SNR thresholds. For better load balancing, clients are steered from busy channels to idle channels. l Sticky Clients-The client match feature also helps mobile clients that tend to stay associated to a W-IAP despite low signal levels. W-IAPs using client match continually monitor the client's RSSI as the client roams between W-IAPs, and move the client to a W-IAP when a better radio match can be found. This prevents mobile clients from remaining associated to the W-IAPs with less than ideal RSSI, which can cause poor connectivity and reduce performance for other clients associated with that W-IAP. l Band Steering-W-IAPs using the client match feature monitor the RSSI for clients that advertise a dualband capability. If a client is currently associated to a 2.4 GHz radio and the W-IAP detects that the client has a good RSSI from the 5 GHz radio, the W-IAP steers the client to the 5 GHz radio, as long as the 5 GHz RSSI is not significantly worse than the 2.4 GHz RSSI, and the W-IAP retains a suitable distribution of clients on each of its radios. l Channel Utilization-Based on the percentage of channel utilization, clients are steered from a busy channel to an idle channel. l Client Capability Match-Based on the client capability match, clients are steered to appropriate channel, for example, HT20, HT40, or VHT80. Starting from the Instant 6.3.1.1-4.0 release, spectrum load balancing is integrated with the client match feature. Client match allows the W-IAPs in a cluster to be divided into several logical W-IAP RF neighborhood called domains, which share the same clients. The VC determines the distribution of clients and balances client load across channels, regardless of whether the W-IAP is responding to the probe requests of wireless clients. You can configure client match parameters in the Instant UI or the CLI. When client match is enabled, the dashboard in the main window displays the Client Match link on selecting a W-IAP in the Access Points tab or a client in the Clients tab. Clicking this link provides a graphical representation of radio map view of a W-IAP and the client distribution on an W-IAP radio. For more information, see Client Match on page 48. In the Instant UI 1. For client match configuration, specify the following parameters in the RF > ARM > Show advanced options tab: 252 | Adaptive Radio Management Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide