Dell W-Series 207 Instant 6.5.1.0-4.3.1.0 User Guide - Page 39
Description, Virtual Controller IP address
View all Dell W-Series 207 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Table 10: Contents of the Info Section in the Instant Main Window Name Description Info section in the Virtual Controller view The Info section in the Virtual Controller view displays the following information: l Name-Displays the VC name. l Country Code-Displays the Country in which the VC is operating. l Virtual Controller IP address-Displays the IP address of the VC. l VC DNS-Displays the DNS IP address configured for the VC. l Management-Indicates if the W-IAP is managed locally or through W- AirWave. l Master-Displays the IP address of the W-IAP acting as VC. l OpenDNS Status-Displays the OpenDNS status. If the OpenDNS status indicates Not Connected, ensure that the network connection is up and appropriate credentials are configured for OpenDNS. l Uplink type-Displays the type of uplink configured on the W-IAP, for example, Ethernet or 3G. l Uplink status-Indicates the uplink status. l Blacklisted clients-Displays the number of blacklisted clients. l Internal RADIUS Users-Displays the number of internal RADIUS users. l Internal Guest Users-Displays the number of internal guest users. l Internal User Open Slots-Displays the available slots for user configuration as supported by the W-IAP model. Info section in the Network view The Info section in the Network view displays the following information: l Name-Displays the name of the network. l Status-Displays the status of the network. l Type-Displays the type of network, for example, Employee, Guest, or Voice. l VLAN-Displays VLAN details. l IP Assignment-Indicates if the W-IAP clients are assigned IP address from the network that the VC is connected to, or from an internal autogenerated IP scope from the VC. l Access-Indicates the level of access control configured for the network. l WMM DSCP-Displays Wi-Fi Multemedia (WMM) DSCP mapping details. l Security level-Indicates the type of user authentication and data encryption configured for the network. The info section for WLAN SSIDs also indicates status of captive portal and CALEA ACLs and provides a link to upload certificates for the internal server. For more information, see Uploading Certificates on page 175. Info section in the Access Point view The Info section in the Access Point view displays the following information: l Name-Displays the name of the selected W-IAP. l IP Address-Displays the IP address of the W-IAP. l Mode-Displays the mode in which the W-IAP is configured to operate. l Spectrum-Displays the status of the spectrum monitor. 39 | Instant User Interface Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide