Dell W-Series 207 Instant 6.5.1.0-4.3.1.0 User Guide - Page 359
Resetting a Remote AP or Campus AP to a W-IAP, Rebooting the W-IAP, Converting a W-IAP using CLI
View all Dell W-Series 207 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 359 highlights
4. Select the Access Point from the Access Point to Convert drop-down list. 5. Click Convert Now to complete the conversion. The W-IAP now operates in the stand-alone mode. Converting a W-IAP using CLI To convert a W-IAP to a remote AP or campus AP: (Instant AP)# convert-aos-ap To convert a W-IAP to a stand-alone W-IAP or to provision a W-IAP in the cluster mode: (Instant AP)# swarm-mode Resetting a Remote AP or Campus AP to a W-IAP The reset knob located on the rear of a W-IAP can be used to reset the W-IAP to factory default settings. To reset a W-IAP, perform the following steps: 1. Turn off the W-IAP. 2. Press and hold the reset knob using a small and narrow object such as a paperclip. 3. Turn on the W-IAP without releasing the reset knob. The power LED flashes within 5 seconds indicating that the reset is completed. 4. Release the reset knob. The W-IAP reboots with the factory default settings. Rebooting the W-IAP If you encounter any problem with the W-IAPs, you can reboot all W-IAPs or a selected W-IAP in a network using the Instant UI. To reboot a W-IAP: 1. Click Maintenance in the Instant main window. 2. Click the Reboot tab. Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide W-IAP Maintenance | 359