Dell W-Series 207 Instant 6.5.1.0-4.3.1.0 User Guide - Page 93

Table 23: Configuration Parameters for WLAN Security Settings in an Employee or Voice Network Parameter Description Security Level Upload Certificate Click Upload Certificate and browse to upload a certificate file for the internal server. For more information on certificates, see Uploading Certificates on page 175. Enterprise, Personal, and Open security levels Fast Roaming You can configure the following fast roaming options for the WLAN SSID: l Opportunistic Key Caching: You can enable Opportunistic Key Caching (OKC) when WPA-2 Enterprise and Both (WPA2 & WPA) encryption types are selected. If OKC is enabled, a cached pairwise master key (PMK) is used when the client roams to a new W-IAP. This allows faster roaming of clients without the need for a complete 802.1X authentication. l 802.11r: Selecting this check box enables fast BSS transition. The Fast BSS Transition mechanism minimizes the delay when a client transitions from one BSS to another within the same cluster. This option is available only when WPA-2 Enterprise and WPA-2 personal encryption keys are selected. l 802.11k: Selecting this check box enables 802.11k roaming on the SSID profile. The 802.11k protocol enables W-IAPs and clients to dynamically measure the available radio resources. When 802.11k is enabled, WIAPs and clients send neighbor reports, beacon reports, and link measurement reports to each other. l 802.11v: Selecting this check box enables the 802.11v-based BSS transition. 802.11v standard defines mechanisms for wireless network management enhancements and BSS transition management. It allows client devices to exchange information about the network topology and RF environment. The BSS transition management mechanism enables an W-IAP to request a voice client to transition to a specific W-IAP, or suggest a set of preferred W-IAPs to a voice client, due to network load balancing or BSS termination. It also helps the voice client identify the best W-IAP to transition to as they roam. Enterprise, Personal, and Open security levels. 4. Click Next to configure access rules. For more information, see Configuring Access Rules for a WLAN SSID Profile on page 94. In the CLI To configure enterprise security settings for the Employee and Voice users: (Instant AP)(config)# wlan ssid-profile (Instant AP)(SSID Profile )# opmode {wpa2-aes|wpa-tkip,wpa2-aes|dynamic-wep} (Instant AP)(SSID Profile )# leap-use-session-key (Instant AP)(SSID Profile )# termination (Instant AP)(SSID Profile )# auth-server (Instant AP)(SSID Profile )# external-server (Instant AP)(SSID Profile )# server-load-balancing (Instant AP)(SSID Profile )# blacklist (Instant AP)(SSID Profile )# mac-authentication (Instant AP)(SSID Profile )# l2-auth-failthrough (Instant AP)(SSID Profile )# auth-survivability (Instant AP)(SSID Profile )# radius-accounting Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide Wireless Network Profiles | 93