Dell W-Series 207 Instant 6.5.1.0-4.3.1.0 User Guide - Page 290

Figure 78 Services Window-ALE Integration 4. In the Server text box, specify the ALE server name or IP address. 5. In the Report interval text box, specify the reporting interval within the range of 6-60 seconds. The W-IAP sends messages to the ALE server at the specified interval. The default interval is 30 seconds. 6. Click OK. In the CLI To enable W-IAP integration with the ALE server: (Instant AP)(config)# ale-server (Instant AP)(config)# ale-report-interval (Instant AP)(config)# end (Instant AP)# commit apply Verifying ALE Configuration on a W-IAP To view the configuration details: (Instant AP)# show ale config To verify the configuration status: (Instant AP)# show ale status Managing BLE Beacons In Instant 6.4.3.4-4.2.1.0, W-IAPs support Dell Bluetooth Low Energy (BLE) devices, such as BT-100 and BT105, which are used for location tracking and proximity detection. The BLE devices can be connected to a WIAP and are monitored or managed by a cloud-based Beacon Management Console (BMC). The BLE Beacon Management feature allows you to configure parameters for managing the BLE beacons and establishing secure communication with the Beacon Management Console (BMC). You can also configure the BLE operation modes that determine the functions of the built-in BLE chip in the W-IAP. The BLE beacon management and BLE operation mode feature is supported only on W-IAP334/335, WIAP314/315, W-IAP324/325, W-IAP224/225, W-IAP205H, and W-IAP214/215 devices. 290 | Services Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide