Dell W-Series 207 Instant 6.5.1.0-4.3.1.0 User Guide - Page 401
W-IAP Configuration for Scenario 2-IPsec: Single Datacenter with Multiple controllers for Redundancy
View all Dell W-Series 207 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 401 highlights
Table 85: W-IAP Configuration for Scenario 2-IPsec: Single Datacenter with Multiple controllers for Redundancy Configuration Steps CLI Commands UI Procedure (Instant AP)(DHCP Profile "l3-dhcp")# client-count 200 NOTE: The IP range configuration on each branch will be the same. Each W-IAP will derive a smaller subnet based on the client count scope using the Branch ID (BID) allocated by controller. 6. Create authentication servers for user authentication. The example in the next column assumes 802.1X SSID. (Instant AP)(config)# wlan auth-server server1 (Instant AP)(Auth Server "server1")# ip 10.2.2.1 (Instant AP)(Auth Server "server1")# port 1812 (Instant AP)(Auth Server "server1")# acctport 1813 (Instant AP)(Auth Server "server1")# key "presharedkey" (Instant AP)(Auth Server "server1")# exit See Configuring an External Server for Authentication (Instant AP)(config)# wlan auth-server server2 (Instant AP)(Auth Server "server2")# ip 10.2.2.2 (Instant AP)(Auth Server "server2")# port 1812 (Instant AP)(Auth Server "server2")# acctport 1813 (Instant AP)(Auth Server "server2")# key "presharedkey" 7. Configure wired port and wireless SSIDs using the authentication servers. Configure wired ports to operate in L3 mode and associate Distributed, L3 mode VLAN 30 to the wired port profile. (Instant AP)(config) # wired-port-profile wired-port (Instant AP)(wired-port-profile "wired-port")# switchport-mode access (Instant AP)(wired-port-profile "wired-port")# allowed-vlan all (Instant AP)(wired-port-profile "wired-port")# native-vlan 30 (Instant AP)(wired-port-profile "wired-port")# no shutdown (Instant AP)(wired-port-profile "wired-port")# access-rule-name wired-port (Instant AP)(wired-port-profile "wired-port")# type employee (Instant AP)(wired-port-profile "wired-port")# authserver server1 (Instant AP)(wired-port-profile "wired-port")# authserver server2 (Instant AP)(wired-port-profile "wired-port")# dot1x (Instant AP)(wired-port-profile "wired-port")# exit (Instant AP)(config)# enet1-port-profile wired-port See Configuring a Wired Profile and Wireless Network Profiles Configure a wireless SSID to operate in L2 mode and associate Centralized, L2 mode VLAN 20 to the WLAN SSID profile. (Instant AP)(config) # wlan ssid-profile guest (Instant AP)(SSID Profile "guest")# enable (Instant AP)(SSID Profile "guest")# type guest (Instant AP)(SSID Profile "guest")# essid guest (Instant AP)(SSID Profile "guest")# opmode opensystem (Instant AP)(SSID Profile "guest")# vlan 20 401 | IAP-VPN Deployment Scenarios Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide