Denon 4310CI Owners Manual - Page 26
Connecting, Network
UPC - 883795001014
View all Denon 4310CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
ILL;il Connecting Devices Connecting to a Home Network (LAN) When you connect the AVR-4310C1 to a home network, you can enjoy listening to music files stored on your PC, Internet radio audio and other sources. You can also control the AVR-4310C1 from your PC via the Web browser. Internet •i• Modem Computer Router a To WAN side To LAN port To LAN port LAN port/ Ethernet connector )) O o r tri 6"r";I• For connections to the Internet, contact an ISP (Internet Service Provider) or a computer shop. Required system J Broadband Internet connection • Modem u Router When using the AVR-4310C1, we recommend you use a router equipped with the following functions: • Built-in DHCP server This function automatically assigns IP addresses on the LAN. • Built-in 100BASE-TX switch When connecting multiple devices, we recommend a switching hub with a speed of 100 Mbps or greater. LI Ethernet cable (CAT-5 or greater recommended) Some flat type Ethernet cables are easily affected by noise. We recommend using a normal type cable. u Computer [Recommended system] • OS : Windows® XP Service Pack2 or later, Windows Vista • Software (Prepare one of the following.) • Windows Media Player ver.11 • DLNA-compatible server software • Internet browser : Microsoft Internet Explorer 6 or later • LAN port • 300 MB or more free disk space Operation is possible with DLNA servers other than the above, but such DLNA servers are not supported. For details, check the Web. NOTE • A contract with an ISP is required to connect to the Internet. No additional contract is needed if you already have a broadband connection to the Internet. • The types of routers that can be used depend on the ISP. Contact an ISP or a computer shop for details. • Depending on the server, video files may be displayed, but they cannot be played on the AVR-4310C1. • If you have an Internet provider contract for a line on which network settings are made manually, make the settings at "Network Connecting" (I2F page 391. • With the AVR-4310C1, it is possible to use the DHCP and Auto IP functions to make the network settings automatically. • When using the AVR-4310C1 with the broadband router's DHCP function enabled, the AVR-4310C1 automatically performs the IP address setting and other settings. When using the AVR-4310C1 connected to a network with no DHCP function, make the settings for the IP address, etc., at "Network Connecting" (page 39). • The AVR-4310C1 is not compatible with PPPoE. A PPPoE-compatible router is required if you have a contract for a line of the type with which the PPPoE is set. • Depending on the ISP with which you have your contract, it may be necessary to make proxy server settings to use the Internet radio function. If you made proxy server settings on the computer to connect to the Internet, make the proxy server settings on the AVR- 4310C1 in the same way. 23