Denon 4310CI Owners Manual - Page 42

Making Detailed Settings (Manual Setup) Setting items Setting contents EQ Customize Audyssey Byp. L/R : Set when not using the "Audyssey Byp LIR" Set so that unused equalizer equalizer. settings are not displayed • Used : Use. when IMULTEQ XTI is • Not Used : Do not use. pressed. Set so that the "Audyssey Byp. LIR" settings can be made when the Audyssey Auto Setup procedure is performed. Equalizer settings for which Audyssey Flat : Set when not using the "Audyssey Flat" equalizer. "Not Used" is set with the • Used : Use. Quick Select function cannot • Not Used : Do not use. be stored and called out. Set so that the "Audyssey Hat" settings can be made when the Audyssey Auto Setup procedure is performed. Manual : Set when not using the "Manual" equalizer. • Used : Use. • Not Used : Do not use. 441:, Making the Network Settings (Network Setup) IGUII Default settings are underlined. Make network settings. Setting items Setting contents Network Connecting 1. Connect the LAN cable )D page 23 "Connecting to a Home Network Make settings for wired (LAN)"). LAN, 2. Turn on the AVR-4310CI (11Fpage 24 "Turning the Power On"). AVR-4310C1 performs automatic network setup due to the DHCP function. When connecting to a network that has no DHCP function, perform the setting in step 3. 3. Set the IP address at the "Network Connecting". ', NETWORK CONNECTING naa • NETWORK CONNECTS Da DHCP IP Address ON 192 168.100.33 Exit • Enrei r addrer.r and .nanna DHCP IP Address Subnet Mask Default Gateway Primary DNS Secondary DNS Proxy Exit OFF 't92 . l 68 255 . 255 000 . 000 000 . 000 • 000 . 000 100 .033 255 .000 000 . 000 000 . 000 000 000 tie ,e1 IP address nanually Setting items Network Connecting Make settings for wired LAN. Setting contents On the GUI menu, select "Network Connecting" - "Detail" and press ENTER. 49. Use to set "DHCP" to "OFF", then press V. The DHCP function is disabled. C?- ' Use A VD to input the address and press ENTER. • IP Address : Set the IP address within the ranges shown below. The Network Audio function cannot be used if other IP addresses are set. CLASS A: 10.0.0.0 - 10.255.255.255 CLASS B: 172.16.0.0 - 172.31.255.255 CLASS C: 192.168.0.0 - 192.168.255.255 • Subnet Mask : When connecting an xDSL modem or terminal adapter directly to the AVR-4310C1, input the subnet mask indicated in the documentation supplied by your provider. Normally input 255.255.255.0. • Default Gateway : When connected to a gateway (router), input its IP address. • Primary DNS, Secondary DNS : If there is only one DNS address indicated in the documentation supplied by your provider, input it at "Primary DNS". If there are two or more DNS addresses, input the first one at "Secondary DNS". ,T Use V to select "Exit" and press ENTER. Setup is complete. When connecting to the network via a Proxy server, select "Proxy" and press ENTER (aC page 40 "Proxy settings"). • If you are using a broadband router (DHCP function), there is no need to make the settings at "IP Address" and "Proxy", since the DHCP function is set to "ON" in the AVR-4310CI's default settings. • If the AVR-4310C1 is being used connected to a network without the DHCP function, the network settings must be made. In this case, some knowledge of networks is required. For details, consult a network administrator. • If you cannot connect to the Internet, recheck the connections and settings IllZpage 23). • If you do not understand about Internet connection, contact your ISP (Internet Service Provider) or the store from which you purchased your computer. • When you want to cancel the setting during IP address input, press RETURN. See overleaT> 39 Main remote control SEARCH Displaying the menu operation buttons Cancel the menu :Moves the cursor (Up/Down/Left/Right) ENTER :Confirm the setting :Return to previous menu