Denon 4310CI Owners Manual - Page 55

Making the Input Settings (Source Select) Giving Names to Preset Stations (Preset Name) GUI' Default settings are underlined. Setting SIRIUS Radio Reception Restrictions GUI (Parental Lock) Default settings are underlined. Setting items Al G8 Select the preset channel. Setting contents This can be set when the input source is HD Radio 1. Press i> or ENTER. 2. Use < l> to set the cursor to the character you want to change. 3. Use AV to change the character, then press ENTER. • Up to 8 characters can be input. • The input character type can be switched by pressing [SEARCH] or MENU while the display name is being changed. • The types of characters that can be input are as shown below. [Upper case characters] ABCDEFGHIJKLMNOPQRSTUVWXYZ [Lower case characters] abcdefahijklmnopqrstuvwxyz [Symbols] ! # 81 Space) [Numbers] 0123456789 4. Repeat steps 2 and 3 to change the display name. Default Yes : Reset to the defaults. Reset all settings to factory No : Do not reset to the defaults. default. Check the XM Radio and SIRIUS Radio Reception GUI Sensitivity (Antenna Aiming) Default settings are underlined. • This can be set when the input source is XM SIRIUS • Install the antenna with radio reception sensitivity set to maximum. Setting items Setting contents Satellite Indicate satellite strength. Terrestrial Indicate terrestrial strength. CI When the input source is XM signal Display Condition Signal strength is strong MEN Signal strength is good II Signal strength is marginal Signal strength is weak No signal Signal 'vVilen the input source is SIRIUS Display I Le Condition Signal strength is excellent Signal strength is good Signal strength is weak No signal • This can be set when the input source is SIRIUS • For any channel, set the radio reception limits. Setting items Setting contents Lock Setting Set the channel reception limits. 1. Press AV to select "Lock Setting", and then press D or ENTER. radio 2. Pressing AV< D, input the password (4 digits number) and press ENTER. 3. Select channel by pressing A V, and set the lock by pressing < D. Unlock : Do not lock selected channel(s). Lock : Lock selected channel(s). When a Parental Locked channel is tuned, "Enter Lock Code" is displayed, then input the password. Edit Lock Code Change the password. • The default password is "0000". • If the password is wrong, "Lock Code is incorrect" is displayed. Input the correct password. • While listening to the channel being played, you can also set parental lock ((er page 60). 1. Press AV to select "Edit Lock Code", and then press D or ENTER. 2. Input current lock code (4 digits) using AV< C., and press ENTER. 3. Input new lock code (4 digits) using AV< D, and press ENTER. 4. Input new lock code (4 digits) again using AV< D, and press ENTER. 5. Press AV to select "Execute", and then press ENTER. If the correct password is input, "Completed" is displayed, and the new password is modified. • If the old password is incorrectly input, "Current Lock Code is incorrect" is displayed, and proceed again from step 1 . • If the password input is 3 digits or less, "Enter 4 digits number" is displayed, and input again with a 4 digit password. • If the new password is not correctly input, "New Lock Codes do not match" is displayed and the password does not change. Main remote control operation buttons SEARCH :Displaying the menu ENu Cancel the menu :Movesthe cursor (Up/Down/Left/Right) ENTER :Confirm the setting :Return to previous menu 52