Denon 4310CI Owners Manual - Page 45
Making, Other, Settings, Option, Setup, IGUII
UPC - 883795001014
View all Denon 4310CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Setting items Setting contents Rch Level Adjust the right output level. - 12dB - +12dB (0dB) channel The "Rch Level" can be set when "Channel" (Cr page 42) is set to "Stereo". Channel Stereo : Select stereo output. Set the signal output from Mono : Select mono output. multi-zone. 4 When "Amp Assign" (CFpage 34) is set to "ZONE (MONO)", the "Channel" setting is automatically set to "Mono". Volume Display Set how volume displayed. Relative : Display - - - dB (Min), in the range -80 dB - 18 dB. is Absolute : Display in the range 0 (Min) - 99. Volume Level Set the volume output 'eve! • The "Volume Display" setting is applied also to the "Volume Level", "Volume Limit" and "Power On Level" display method. • The "Volume Display" setting applies to all zones. Variable : adjustment enabled by main unit and remote controller. - 40dB (41) : Fix volume at -40 dB. Set when adjusting volume by external amp. 0dB (81) : Fix volume at 0 dB. Set when adjusting volume by external amp. 4 - When "Amp Assign" (t page 34) is set to "ZONE2", "ZONE3" or "ZONE (MONO)", the "Volume Level" setting is automatically set to "Variable". Volume Limit OFF : Do not set a maximum volume. Make a setting for maximum -20dB (61) / -10dB (71) / 0dB (81) volume. 4 - Can be set when the multi-zone "Volume Level" setting (o is "Variable". 'page 42) Power On Level Last : Use the memorized setting from the last session. Define the volume setting - -- (0) : Always use the muting on condition when power is turned on. that is active when the -80dB - 18dB (1 - 99) : The volume is adjusted to the set level. Dower is turned on. 4 - Can be set when the multi-zone "Volume Level" setting (0- page 421 is "Variable". Mute Level Full : The sound is muted entirely. Set the amount of attenuation -40dB : The sound is attenuated by 40 dB down. when muting is on. -20dB : The sound is attenuated by 20 dB down. J Making Other Settings (Option Setup) IGUII OPTION Default settings are underlined. Setting items Setting contents Volume Control Volume Display : Set how volume is displayed. Set the MAIN ZONE volume • Relative : Display --dB (Min), in the range -80 dB - 18 dB. setting. • Absolute : Display in the range 0 (Min) - 99. rfr • The "Volume Display" setting is applied also to the "Volume Limit and "Power On Level" display method. • The "Volume Display" setting applies to all zones. Volume Limit : Make a setting for maximum volume • OFF : Do not set a maximum volume. • -20dB (61) / -10dB (71) / 0dB (811 Power nn I Avpl : Define the volume qetting that is active \Arhen the power is turned on. • Last : Use the memorized setting from the last session 0) : Always use the muting on condition when power is turned on. • -80dB - 18dB (1 - 99) : The volume is adjusted to the set level. Mute Level : Set the amount of attenuation when muting is on • Full : The sound is muted entirely. • -40dB : The sound is attenuated by 40 dB down. • -20dB : The sound is attenuated by 20 dB down. Source Delete PHONO / CD / DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX / NET/ Remove input sources USB / XM / SIRIUS / HD Radio : Select input source that is not used. that are not used from the • ON : Use this source. display. • Delete : Do not use this source. GUI Make GUI related settings. NOTE • Input sources being used in the various zones cannot be deleted. • Input sources set to "Delete" cannot be selected using SOURCE SELECT. Screensaver : Make screensaver settings. • ON : The screen saver is activated during GUI menu display or NET/ USB / iPod / XM / SIRIUS / HD Radio screen display if no operation is performed approximately for a continuous 3-minute period. When you press AV‹ l>, the screen saver is cancelled and the screen before that screen saver started is displayed. • OFF : Screen saver is not activated. Wall Paper : Set wallpaper to display the background when playback is stopped, etc. • Picture : Set the background to a picture (DENON logo). • Black : Set the background to black. • Gray : Set the background to gray. • Blue : Set the background to blue. See overleaf > Main remote control operation buttons SEARCH :Displaying the menu ENu Cancel the menu :Moves the cursor (Up/Down/Left/Right) ENTER :Confirm the setting :Return to previous menu 42