Denon 4310CI Owners Manual - Page 78
v2,7„sr
UPC - 883795001014
View all Denon 4310CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
,Adjusting the Sound and ;: a ffluality lidio/ViiihpAiju Setting items Setting contents Audyssey Settings MultEQ XT : Corrects both time and frequency response problems in the Set MultEQ XT, Dynamic EQ listening area. and Dynamic Volume. • Audyssey : Optimize the frequency response of all speakers. • Audyssey Byp.L/R : Optimize frequency response of speakers except NOTE front L and R speakers. If you have not performed • Audyssey Flat : Optimize frequency response of all speakers to flat Auto Setup, or if you change response. the speaker settings after • Manual : Apply frequency response set with "Manual EQ" (0- page performing Auto Setup, you 761. may not be able to select • OFF : Turn "MultEQ XT" equalizer off. Dynamic EQ/Dynamic Volume,and "RunAudyssey" may be displayed. In this case, either perform • "Audyssey", "Audyssey Byp. L/R" and "Audyssey Flat" can be selected after Audyssey Auto Setup has been performed. "Audyssey" is automatically selected after performing Audyssey Auto Setup. "When Audyssey Auto Setup over again or perform "Restore" "Audyssey", "AudysseyByp.L/R" or "AudysseyFlat"isselected, " ,v2,7„sr lights. (terpage 33) to return to the • After running Audyssey Auto Setup, if the Speaker Configuration, settings after Audyssey Auto Distance, Channel Level, and Crossover Frequency have changed without Setup was run. increasing the number of speakers measured, only %wow" lights. • If "Dynamic EQ" or "Dynamic Volume" is set to "ON" when "MultEQ XT" is set to either "OFF" or "Manual": "MultEQ XT" is automatically set to "Audyssey'.' • You can also press [MULTEQ XI] to set. NOTE • "MultEQ XT" and "Manual ED" cannot be selected when "EQ Customize" is set to "Not Used" (BaT'page 39). • When using headphones, "MultEQ XT" is set to "OFF". Dynamic EQ : Solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. • ON : Use the Dynamic EQ equalizer. • OFF : Do not use the Dynamic EQ equalizer. LO' • After performing "Audyssey Auto Setup", the "Dynamic EQ" setting automatically becomes "ON". • „ nAUt,S°SIo, " is displayed when set to "ON". • When "MultEQ XT" is set to "OFF" or "Manual", "Dynamic EQ" is automatically set to "OFF". • If "Dynamic Volume" is set to "ON", "Dynamic EQ" is automatically set to "ON". • When you set "Dynamic ED" to "ON", "Tone Control" is switched "OFF". • You can also press [DYNAMIC EQ] to set. Setting items Audyssey Settings 1Continued) Setting contents -,- Dynamic EQ ON/Volume : OFF - Dynamic EQ / Volume OFF - 0 "Red" "Off" About Dynamic EQ Audyssey Dynamic EQ solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Audyssey Dynamic EQ works in tandem with Audyssey MultEQ® XT to provide well-balanced sound for every listener at any volume level. Reference Level Offset : Audyssey Dynamic EQ takes the standard film mixing level of 85 dB SPL during -20 dB FS input as its reference level. However, since standardization is lacking outside the film industry, the reference level of media contents may not be appropriate. In order to view such contents, Reference Level Offset of Dynamic EQ has available offsets of 5 dB, 10 dB and 15 dB. • OdB : Suitable for viewing movies. • 5dB : Suitable for listening to classical music and other content mixed at a high level. • 10dB : Suitable for listening to jazz and other audio sources with a wide dynamic range. Also suitable for viewing TV. • 15dB: Suitable for listening to pop, rock music and other content with an extremely wide dynamic range. Setting is enabled when "Dynamic EQ" is "ON" (Crpage 75). See overleaf > 75 Main remote control operation buttons SEARCH :Displaying the menu ENu Cancel the menu e8) :Moves the cursor (Up/Down/Left/Right) ENTER :Confirm the setting :Return to previous menu