Denon D-107 Owners Manual - Page 13

ENGLISH 7 MENU FUNCTION 2 Be sure to set the current time beforehand. 2 Various functions can be operated and various settings made using the menu function. Press the + or − button after pressing the MENU button to perform the settings listed below. Setting item DisplayMode [Display brightness setting] Setting details Set the display's brightness. Select "Normal", "Dimmer-1" or "Dimmer-2". TimerSet? [Timer time setting] Use this to make the everyday timer and once timer settings. Page 13 17, 18 Timer Mode [Timer mode setting] TimerOn/Off Use this to turn the everyday timer and [Timer ON/OFF setting] once timer to "ON" or "OFF". 18 TimerCheck? [Timer setting check] Use this to check the everyday timer and once timer settings. 19 ClockAdjust Use this to set the current time. 14 [Time setting] Tuner Mode TunerPreset [Presettings] Use this to store the reception band and frequency at the number buttons. 15 [Tuner mode setting] StationName Use these to give names to [Station name setting] automatically set stations. 16 Eco Mode [Eco-mode setting] Use this for a lower power consumption in the standby mode. Set to "On" or "Off". 13 This function can be used to automatically set the power to the AutoOffMode standby mode if the set remains in the stop mode for the set amount [Auto off mode setting] of time with the function set to "CD". 14 Set to "On" or "Off" and select the time (5, 10, 20 or 30 minutes). 2 The MENU button functions in both the MENU stop and play modes. 2 Press the MENU button to cancel the menu function currently being set. (RC-909) MENU 2 To set the menu functions back to the default values, press the FUNCTION and 1/3 buttons on the main unit simultaneously, then within 3 seconds press the 2/BAND button. "RAM CLEAR" is displayed for approximately 2 seconds and the values are reset to their defaults. FUNCTION 2 / BAND (RC-909) Within 3 seconds (Main unit) (Main unit) (Main unit) Display brightness setting TIME TITLE FOLDER SLEEP TONE/SDB DISPLAY ENTER MENU 1 2, 4 STOP PLAY/PAUSE /BAND VOLUME PRESET + 3 - MUTE FUNCTION 1 Press the MENU button. MENU MENU DisplayMode 2 Press the ENTER button. ENTER MENU Normal? 3 Press the +/− buttons to select the display brightness. Each time you press this buttons, the display changes as follows: PRESET + - Normal? Dimmer-1? Dimmer-2? 4 Press the ENTER button. ENTER • The setting is entered. Eco-mode setting 2 Be sure to set the current time beforehand. TIME TITLE FOLDER SLEEP TONE/SDB DISPLAY ENTER MENU 1 3, 5 2, 4 STOP PLAY/PAUSE /BAND VOLUME PRESET + - MUTE FUNCTION 1 Press the MENU button. MENU MENU DisplayMode 2 Press the +/− buttons to select "ECO Mode". PRESET + - MENU ECO Mode 3 Press the ENTER button. ENTER MENU ECO On/Off? 4 Press the +/− buttons to make "On" or "Off" flash. The selected setting ("On" or "Off") switches each time the +/− buttons is pressed. The setting that is flashing is the one that is selected. PRESET + - 5 Press the ENTER button. ENTER • The "MENU" indicator turns off and the setting is completed. NOTE: The display and indicators remain off while the standby mode is set in the eco-mode. To turn on the power, press the ON/STANDBY button on the CD receiver or the POWER button on the remote control unit. (The auto power on function does not work.) 13