Denon D-107 Owners Manual - Page 7
ENGLISH, Connecting the speakers and cords - parts
UPC - 081757504850
View all Denon D-107 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Connecting a CD receiver and subwoofer 2 About mounting the main unit stand You will need a screwdriver to assemble. q Connect the system cable to the bottom of the main unit. Top [Connector] Press Connect with the driver part of the system cable's connector facing upwards. Press Insert the plug securely, pressing it in all the way it will go. w Run the system cable around to the back, line up the positioning pin of the included main unit stand with the hole in the main unit, then mount with the included screws. ENGLISH Connecting the speakers 2 About mounting the speaker stand Paying attention to set the included speaker stand in the proper front/back position, line up the positioning pin with Positioning pin the hole in the speaker, then mount it with the included screws and fasten it securely. Front Positioning pin hole 2 Connecting the speakers and cords • Use the included speaker cords to connect the speakers and subwoofer. • Connect the left channel speaker (the left side as soon from the front) to the "L" terminals, the right channel speaker to the "R" terminals. q Lower the lever. w Insert the speaker cord. e Return the lever. Core wire (copper-colored) Front Positioning pin hole Positioning pin e Connect the plug on the opposite side of the system cable to the subwoofer. SYSTEM CONNECTOR SPEAKER SYSTEM IMPEDANCE:6 16 Connect with the wider part of the system cable's R L connector facing upwards. Insert the plug securely, pressing it in all the way it will go. 2 About mounting the cable cover [When mounting on the wall] (See page 8.) Run the system cable around to the back, line up the positioning pin of the included cable cover with the hole in the main unit, then mount with the included screws. Positioning pin Positioning pin hole Front Connect the cord's copper-colored core wire to the "+" side, the silver-colored core wire to the "−" side. Core wire (copper-colored) Core wire (silver-colored) • Gently pull the cord to check that it is securely connected. SPEAKER SYSTEM IMPEDANCE:6 16 Push down and insert the speaker cord. Core wire (silver-colored) R L NOTES: • Be sure to unplug the power supply cord before connecting the speakers. • Be sure to connect the speaker cords properly (+ to +, − to −, L to L and R to R). • Do not short-circuit the speaker cords. If the power is turned on, accidentally shortcircuiting the speaker cords could cause damage or accidents. • Be sure to connect the speaker to the speaker terminals with the proper polarities (+ to +, − to −). If the polarities are wrong, the sound from the center will be weak, the positioning of the instruments will be unclear and the stereo effect will be poor. • Never play such special signals as sine waves or the fast-forwarding signals of a tape recorder continuously. SPEAKER SYSTEM IMPEDANCE:6 16 SPEAKER SYSTEM IMPEDANCE:6 16 R L R L 7