Epson ActionTower 7500 User Manual - Page 104
Installing the Hard Disk Drive, With the drive components facing down, slide the drive into
![]() |
View all Epson ActionTower 7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Installing the Hard Disk Drive Before you install the hard disk drive, turn it over so you can see the circuit board, as shown below. Locate the side of the drive connector containing pin 1, indicated by a "1" or "2" printed on the board. You need to know the location of pin 1 when you connect the hard drive cable. Follow these steps to install a hard disk drive in the mounting bracket: 1. With the drive components facing down, slide the drive into the bracket until the front of the drive is nearly flush with the edge of the bracket. 5-6 Installing and Removing Slimline Drives
![](/manual_guide/products/epson-actiontower-7500-user-manual-eb66eee/104.png)
Installing the Hard Disk Drive
Before you install the hard disk drive, turn it over so you can
see the circuit board, as shown below. Locate the side of the
drive connector containing pin 1, indicated by a “1” or “2”
printed on the board. You need to know the location of pin 1
when you connect the hard drive cable.
Follow these steps to install a hard disk drive in the mounting
bracket:
1.
With the drive components facing down, slide the drive into
the bracket until the front of the drive is nearly flush with
the edge of the bracket.
5-6
Installing and Removing Slimline Drives