Epson ActionTower 7500 User Manual - Page 50
Running the Installation Program, Insert the PCI IDE Drivers diskette in drive A.
![]() |
View all Epson ActionTower 7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Running the Installation Program Follow these steps to install the PCI IDE drivers: 1. Insert the PCI IDE Drivers diskette in drive A. 2. Access the DOS prompt, if you are not there already 3 . T y p e A : and press Enter to log onto drive A. 4. Type INSTALL and press E n t e r . 5. Follow the instructions on the screen to install the PCI IDE drivers on your hard disk. Note Not all hard disk drives can take full advantage of the PCI IDE interface. To take advantage of this feature, your hard disk drive must support the ATA-2 standard and a 32-bit data path. If the drive is larger than 528MB, it also must support LBA. If you need information on your hard disk drive, see the hardware specifications for the drive or contact the drive manufacturer and request a product specification. 2-20 Running SETUP and Installing Drivers
![](/manual_guide/products/epson-actiontower-7500-user-manual-eb66eee/50.png)