Epson ActionTower 7500 User Manual - Page 60
Stopping a Command or Program, Press Ctrl c
![]() |
View all Epson ActionTower 7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Tower computer When you want to remove the diskette, make sure the drive light is off; then press the release button. Remove the diskette and store it properly. Caution Never remove a diskette, reset the computer, or turn it off while a diskette drive light is on. You could lose data. Also, remove all diskettes before you turn off the computer. Stopping a Command or Program You may sometimes need to stop a command or program while it is running. If you want to stop a DOS command or DOS application program, try one of the following from the DOS prompt: Press Pause Press Ctrl c Press CM Break Using Your Computer 3-9
![](/manual_guide/products/epson-actiontower-7500-user-manual-eb66eee/60.png)
Tower
computer
When you want to remove the diskette, make sure the drive
light is off; then press the release button. Remove the diskette
and store it properly.
Caution
Never remove a diskette, reset the computer, or turn it off
while a diskette drive light is on. You could lose data. Also,
remove all diskettes before you turn off the computer.
Stopping a Command or Program
You may sometimes need to stop a command or program while
it is running. If you want to stop a DOS command or DOS
application program, try one of the following from the DOS
prompt:
Press Pause
Press Ctrl c
Press CM Break
Using Your Computer
3-9