Epson ActionTower 7500 User Manual - Page 47
Green PC options continued, Non_SMI CPU
![]() |
View all Epson ActionTower 7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Green PC options (continued) Option System Suspend Timer VGA with Power Down feature Non_SMI CPU support IDE Hard Disk Standby Timer ** System enters Doze/Standby modes by VGA access event System wakeup from Suspend modes by (list of 13 sources of SMI access) Settings Description 2 minutes* 4 minutes 8 minutes 16 minutes 32 minutes 64 minutes 128 minutes 256 minutes 512 minutes Disabled Sets the time period of system inactivity (following any Doze and Standby periods that are set) after which the system enters Suspend mode or allows you to disable entry into Suspend mode VESA DPMS Standard None * Selects the method the VGA chip uses to enter Doze mode Generate IRQ10 * Generate lRQl5 Allows the ISA bus bridge controller to replace the System Management Interrupt (SMI) request when a non-system management mode CPU is used, for instance, an Intel® DX, SX, or DX2 processor Disabled 1 to 15 minutes 15 minutes * Sets the time period of hard disk drive inactivity after which the hard disk enters Standby mode or allows you to disable the hard disk standby timer On Off * Enables or disables checking of video activity to determine whether the system enters a power-saving mode On* Selects the SMI access events Off from which the system exits Suspend modes: you can set each type of event to On or Off * Default setting ** Some hard disk drives do not support a low-power standby mode. Also, the delay caused by the hard disk drive returning to active mode may cause errors in some applications. If you have problems, you may want to disable the Hard Disk Standby Timer option (Disabled is the default setting). Running SETUP and Installing Drivers 2-17
![](/manual_guide/products/epson-actiontower-7500-user-manual-eb66eee/47.png)