Epson ActionTower 7500 User Manual - Page 26
Connecting a Parallel or Serial Device, capabilities, see Using the Advanced System Setup Options
View all Epson ActionTower 7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Connecting a Parallel or Serial Device Your computer has one multi-mode parallel (printer) port and two serial ports. To connect a printer or other peripheral device, refer to the illustrations under "Connecting System Components" as you follow the appropriate instructions in this section. Using the parallel (printer) port Follow these steps to connect a parallel device to your computer: 1. Place the parallel device and the computer so that the backs are facing you. 2. Align the connector end of the parallel cable with the printer port and plug it in. If the connector has retaining screws, tighten them. This icon identifies the printer port. 3. Connect the other end of the cable to the parallel device. To secure the cable, squeeze the clips at each side of the device port and push them into place. 4. Plug the parallel device's power cord into a grounded electrical outlet. If you want to take advantage of the port's extended capabilities, see "Using the Advanced System Setup Options" in Chapter 2. 1-6 Setting Up Your System