Epson ActionTower 7500 User Manual - Page 84

packing material with the component side facing up. Keep

Get Epson ActionTower 7500 PDF manuals and user guides View all Epson ActionTower 7500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 84 highlights

As you install option cards, keep these guidelines in mind: Make sure you know whether the card you are installing is an ISA card or a PCI card, so you can install it in the correct type of slot. If you have an S-bit ISA card, you can install it in a 16-bit ISA slot, as long as it fits. Check the components on your card and the system board before deciding which slot to use. Make sure that no components are touching or obstructing other cards or cables. When you unpack the option card, do not touch the components on the circuit board or the gold-edged connectors. Place the card gently on top of its original packing material with the component side facing up. Keep the packing materials in case you remove it later. Adjust any switches or jumpers on the card, if necessary, before you install it. (See the option card instructions.) Also, see if you need to change any jumpers on the system board, as described under "Changing the Jumper Settings." Installing and Removing Options 4-21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
As you install option cards, keep these guidelines in mind:
Make sure you know whether the card you are installing is
an ISA card or a PCI card, so you can install it in the correct
type of slot.
If you have an S-bit ISA card, you can install it in a 16-bit
ISA slot, as long as it fits.
Check the components on your card and the system board
before deciding which slot to use. Make sure that no
components are touching or obstructing other cards or
cables.
When you unpack the option card, do not touch the
components on the circuit board or the gold-edged
connectors. Place the card gently on top of its original
packing material with the component side facing up. Keep
the packing materials in case you remove it later.
Adjust any switches or jumpers on the card, if necessary,
before you install it. (See the option card instructions.) Also,
see if you need to change any jumpers on the system board,
as described under “Changing the Jumper Settings.”
Installing and Removing Options
4-21