Epson ActionTower 7500 User Manual - Page 128
and two with smaller, with full-size
![]() |
View all Epson ActionTower 7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
4. Position the connector on the cable so the red wire aligns with pin 1 on the drive. Make sure the holes in the cable connector fit over all the pins; then push in the connector. 5. Locate one of the power supply cables that lead from the power supply. (They have multi-colored wires and a plastic connector on the end.) Align the notched comers of the power supply connector and the drive's power connector; then push in the connector, as shown above. Note Your system includes five power supply cables; three with full-size connectors and two with smaller connectors. If you need more than these five connectors, you can purchase Y-adapters for power supply cables at most computer accessory stores. A Y-adapter allows you to use one connector for two devices. lnstalling and Removing Tower Drives 6-7
![](/manual_guide/products/epson-actiontower-7500-user-manual-eb66eee/128.png)