Epson ActionTower 7500 User Manual - Page 38

The Integrated Peripherals options are described in the table below. Integrated peripherals options Option Settings Description COM Port 1 COM Port 2 3F8, IRQ4 * (COM1) 2F8, IRQ3 * (COM2) 338, IRQ4 238, IRQ3 3E8, IRQ4 2E8, IRQ3 2E8, IRQ4 2E0, IRQ3 220, IRQ4 228, IRQ3 Auto Disabled Assign the address for the built-in primary and secondary serial ports: the Auto setting detects any optional ports you may have installed and sets the built-in ports automatically based on the optional port settings to avoid conflicts (if no optional ports are installed, Auto sets the built-in ports to their default settings): the Disabled setting disables the port LPT Port 378, IRQ7 * 278, IRQ7 Auto Disabled Assigns the address for the built-in parallel port: the Auto setting detects any optional ports you may have installed and sets the built-in port automatically based on the optional port settings to avoid conflicts (if no optional ports are installed, Auto sets the built-in port to the default setting): select Disabled to disable the port LPT Mode Standard Bi-Directional * ECP Selects unidirectional AT mode Selects PS/2 bidirectional mode Selects Extended Capabilities Port bidirectional mode Floppy Controller Enabled * Disabled Enables or disables the built-in diskette drive controller * Default setting 2-8 Running SETUP and lnstalling Drivers