Epson ActionTower 7500 User Manual - Page 35
Using the Fixed Disk Setup Option, fixed Disk Setup screen options, Individual drive options
View all Epson ActionTower 7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Using the Fixed Disk Setup Option The Fixed Disk Setup option defines the types of hard disk drives connected to the primary and secondary IDE interfaces in your system. When you select this option, you see the Fixed Disk Setup screen. Note These options do not configure other IDE devices, such as CD-ROM drives, connected to the secondary IDE interface. fixed Disk Setup screen options If any of the drives you installed are larger than 528MB, make sure the Large Disk Access mode option is set to DOS (the default setting). Set this option to Other if you are using U N I X® or an operating system other than MS-DOS® or Windows. From this screen, you can configure each of the installed drives by selecting them at these options: IDE Adapter 0 Master IDE Adapter 0 Slave IDE Adapter 1 Master IDE Adapter 1 Slave The IDE Adapter 0 drives are the master and slave drives connected to your primary IDE interface. The IDE Adapter 1 drives are connected to the secondary IDE interface. Individual drive options Your computer comes with a hard disk auto-sensing feature. To use it, select one of the drives you have installed from the Fixed Disk Setup screen. On the screen that appears for that drive, press Enter to select the Autotype Fixed Disk option. The system detects the type of hard disk drive, fills in the drive's parameters, and sets the remaining options on the screen. Running SETUP and Installing Drivers 2-5