Epson ActionTower 7500 User Manual - Page 123
Installing and Removing Tower Drives, remove any option cards that may be in your way. Once
View all Epson ActionTower 7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Install a drive in the rear internal drive bracket Remove a drive from the rear internal drive bracket. Also consult the documentation that came with your drive for additional information. Your tower computer can hold up to seven mass storage devices, as described in the table below. Drive bay Four externally accessible bays One front internal bay Two rear internal bays Drive type Diskette, CD-ROM, tape, or optical drives, or a PCMCIA card reader Hard disk drive only Hard disk drive only Drive size Two 5.25-inch, half-height drives or one 5.25-inch, full-height drive and two 3.5-inch, half-height drives One 3.5-inch, half-height or third-height drive Two 3.5-inch, half-height or third-height drives or one 3.5-inch, full-height drive To install or remove a drive, first remove the computer's cover as described under "Removing the Cover" in Chapter 4. Then remove any option cards that may be in your way. Once you finish installing or removing drives, replace any option cards you removed. See "Installing an Option Card" in Chapter 4 for instructions. 6-2 Installing and Removing Tower Drives