Epson C11C605001 Reference Guide - Page 105
Top of Form, LF/FF Load, Pause, the codes the printer is receiving. If characters are printable
UPC - 010343853614
View all Epson C11C605001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Follow these steps to print a hex dump: 1. Make sure paper is loaded and the printer is turned off. 5 c Caution: Whenever you turn off the printer, wait at least five seconds before turning it back on; otherwise you may damage the printer. 5 2. To enter hex dump mode, hold down the Top of Form and LF/FF Load buttons and then turn on the printer. 5 3. Open a software program and send a print job to the printer. Your printer prints all the codes it receives in hexadecimal format. 5 5 By comparing the characters printed in the right column with the printout of the hexadecimal codes, you can check 5 the codes the printer is receiving. If characters are printable, they appear in the right column as ASCII characters. Nonprintable codes, such as control codes, are represented 5 by dots. 4. To turn off hex dump mode, press the Pause button, and 5 then turn off the printer. c Caution: Do not turn off the printer while it is printing the hex dump. 5 5 Always press the Pause button to stop printing and then turn off the printer. 5 Problem Solving 105