Epson C11C605001 Reference Guide - Page 136
Using the pull tractor with the front tractor, Loading Paper Onto the Front Tractor on
UPC - 010343853614
View all Epson C11C605001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Using the pull tractor with the front tractor If you are using labels or multi-part forms with more than seven parts (including the original), you should use the pull tractor with the printer's built-in front tractor. You can switch between the front and rear tractors at any time when you are using the pull tractor. Just press the Front/Rear button and then use the LF/FF Load button to feed the paper the additional distance to the pull tractor. (Labels require special handling. See "Using labels" on page 42 for details.) To tear off documents, press the LF/FF Load button to advance the paper to a point where it can be torn off. To use the pull tractor with the front tractor, follow these steps: 1. Turn on the printer and open the back cover. 2. Make sure paper is loaded on the front tractor to the top-of-form position. If paper is already loaded on the tractor but it is in the standby position, press the Front/Rear or LF/FF Load button (depending on which tractor is selected) to load the paper to the top-of-form position. (If no paper is loaded on the front tractor, load paper. See "Loading Paper Onto the Front Tractor" on page 15 for instructions.) 3. Once you have paper loaded on the printer's front tractor, use the LF/FF Load button to advance the paper to the pull tractor. 136 Options and Consumables