Epson C11C605001 Reference Guide - Page 146
space at the back of the printer, fitting the pins on the sides
UPC - 010343853614
View all Epson C11C605001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
3. Close the paper separator cover. Then open the back flap and lock it in place. back flap 4. Open the back cover. 5. Hold the perforation cutter by its handle with the connector facing to the right. Then lower the perforation cutter into the space at the back of the printer, fitting the pins on the sides of the perforation cutter into the notches in the printer. 6. After the perforation cutter is in place, push back the perforation cutter handle flat. 146 Options and Consumables
146
Options and Consumables
3.
Close the paper separator cover. Then open the back flap
and lock it in place.
4.
Open the back cover.
5.
Hold the perforation cutter by its handle with the connector
facing to the right. Then lower the perforation cutter into the
space at the back of the printer, fitting the pins on the sides
of the perforation cutter into the notches in the printer.
6.
After the perforation cutter is in place, push back the
perforation cutter handle flat.
back flap