Epson C11C605001 Reference Guide - Page 92
Auto cut mode, Overlapping multipart forms, Continuous forms with labels, Top of, Micro Feed
UPC - 010343853614
View all Epson C11C605001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Auto cut mode This function is available only when the optional perforation cutter (#C81570X) is installed in the printer. When this setting is set to On, the perforation cutter cuts each page at the perforation automatically. Note the following when you turn on this function: ❏ Make sure the paper is at least 4 inches long. ❏ Do not change the top of form position using the Top of Form button. ❏ Do not feed the paper using the Micro Feed buttons. ❏ Never cut labels, continuous paper with labels, and overlapping multi-part forms. ❏ If you set the cutting method through the printer driver's paper source setting, it overrides Auto cut mode. Auto cut/back mode This function is available only when the optional perforation cutter (#C81570X) is installed in the printer. When you turn on this feature, the printer automatically cuts each page at the perforation and feeds the paper to the top-of-form position while it is printing. Overlapping multipart forms When this setting is set to On, you can print on overlapping multi-part forms that vary in thickness. Continuous forms with labels When this setting is set to On, you can print on continuous forms with labels. You can choose the label position in Default-setting mode. See "Adjusting the label position" on page 32 for details. 92 Control Panel