Epson C11C605001 Reference Guide - Page 151
Cutting off a printed document, Tractor Rear: Do not cut
UPC - 010343853614
View all Epson C11C605001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Cutting off a printed document You can cut off a printed document using one of the following 6 methods: ❏ If you set the cutting method through the printer driver, the printer driver setting overrides the SelecType settings. 6 You can select the following from the printer driver's paper source settings: Tractor Front: Do not cut Tractor Front: Cut last page only 6 Tractor Front: Cut each page Tractor Rear: Do not cut Tractor Rear: Cut last page only 6 Tractor Rear: Cut each page ❏ Set the Auto cut mode setting to On in SelecType mode. 6 See page 94 for instructions. ❏ Select the printer's tear-off mode as follows: 6 1. Make sure printing has finished. Open the paper separator cover. You see the perforation cutter's tear-off edge. 6 2. Press the Tear Off button to enter tear-off mode. The printer feeds the paper's perforation to the perforation cutter's 6 tear-off edge. 3. If the paper is not aligned with the tear-off edge, adjust the tear-off position by pressing the Micro Feed buttons. 6 4. Press the Tear Off button again. The printer cuts off your printed document and feeds the fresh paper back to the 6 top-of-form position. 6 Options and Consumables 151