Epson C11C605001 Reference Guide - Page 31

Note: 2 If you enter top-of-form mode right after loading paper, you can set the loading and top-of-form positions at the same time. (When you use the optional pull tractor, you cannot adjust the loading position.) Adjusting the printing position 2 You may need to adjust the printing position in the middle of a page, or to adjust the top-of-form position when using labels. 2 When you move the printing position, you temporarily change the top-of-form position by the same amount. For example, if 2 you adjust the printing in the middle of the page so that it falls a half-inch lower, the next page will begin printing a half-inch lower as well. The printer remembers this temporary 2 top-of-form position until the next time you load paper, switch tractors, or turn off the printer. To adjust the printing position or top-of-form position, follow these steps: 2 1. Start printing your document. When you reach the text that you want to align at a particular spot on the page, press the Pause button to stop printing. 2. Use the Micro Feed buttons to adjust the position where 2 you want your next line of text to fall. Press the button once 2 to feed the paper forward or backward in 1/216-inch increments, or hold it down to move the paper continuously. c Caution: To adjust the printing position when you are printing on 2 labels, continuous forms with labels, or overlapping multi-part forms, use the Micro Feedu button only. Never feed labels backward through the printer. When fed 2 backward, labels may easily peel off the backing sheet and cause a paper jam. 2 3. When you are finished, press the Pause button to resume printing your document. Paper Handling 31