Epson C11C605001 Reference Guide - Page 156
Installing an interface card, you use in SelecType mode. See Changing the settings in SelecType
UPC - 010343853614
View all Epson C11C605001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Note: Your printer has an auto interface mode function that allows you to connect to more than one interface at a time. See "Changing the settings in SelecType mode" on page 94 for details. Coax and twinax interfaces enable the printer to communicate with an IBM minicomputer or mainframe via coax or twinax protocol. This allows Epson printers to function as local IBM printers without the addition of any other circuitry or components. Installing an interface card Follow the steps below to install an optional interface card. Note: If you install an optional interface card, be sure to select the interface you use in SelecType mode. See "Changing the settings in SelecType mode" on page 94 for details. 1. Turn off both your printer and your computer. Then remove all power and interface cables from the printer. 2. Open the interface cover on the back of the printer. interface cover 3. Be sure to set any switches and jumpers on the card, as necessary. (See the interface card's manual for details.) 156 Options and Consumables