Epson C11C605001 Reference Guide - Page 143

4. Use a cross-head screwdriver to remove the two screws 6 securing the paper separator to the printer. Then remove the paper separator that came with the pull tractor. 5. Using the two screws, reinstall the original paper separator and close the paper separator cover. 6 Using the Perforation Cutter The optional perforation cutter (#C81507X) makes using 6 continuous paper easier by cutting off the perforation of your printed documents for you. When you use the perforation cutter, be sure to set the page length to match your paper. 6 The perforation cutter comes with the perforated paper output attachment and the perforated paper output tray. See 6 "Attaching the perforated paper output attachment and output tray" on page 148 to attach the perforated paper output attachment and the output tray. 6 c Caution: ❏ When the perforation cutter is installed, never cut labels, overlapping multi-part forms, or continuous forms with 6 labels. 6 ❏ Make sure that the paper thickness and perforation between pages are within the specified ranges. See the paper specifications in Appendix A. 6 ❏ Make sure the paper is at least 4 inches long and no wider than 16 inches. 6 ❏ When using multi-part forms with the perforation cutter, make sure that you use multi-part forms with seven parts (one original and six copies) or less. 6 Options and Consumables 143