Epson C11C605001 Reference Guide - Page 159
Using a Print Server, Setting the IP address from the control panel
UPC - 010343853614
View all Epson C11C605001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Using a Print Server 6 You can use this printer as a network printer by installing the EpsonNet 10/100 Base Tx Int. Print Server 5 (C82434✼) in the printer's parallel interface port. See the Administrator's Manual packaged with this option for instructions on installation and use. 6 Setting the IP address from the control panel 6 Follow these steps to get the IP address using the control panel: 1. Turn on the printer. 6 6 2. Press the Menu (Tear Off and Top of Form) buttons to enter SelecType mode. 3. Press the ItemU (Font) or ItemD (Pitch) button to select the 6 Get IP address setting and set the setting to Panel using the SetU (Tear Off) or SetD (Top of Form) button. 4. Press the ItemD (Pitch) button to select the IP byte 1. 6 5. Change the number for the IP byte 1 using the SetU (Tear Off) or SetD (Top of Form) button. 6 6. Press the ItemD (Pitch) button to select the next byte and 6 change the number using the SetU (Tear Off) or SetD (Top of Form) button. 7. Repeat step 6 until the number for the IP byte 4 is set. 6 8. Set the numbers for SM byte 1 to 4 and GW byte 1 to 4 as you did for the IP byte. 6 9. Confirm the numbers that you selected for the IP byte 1 to 4, SM byte 1 to 4, and GW byte 1 to 4 are correctly set. Options and Consumables 159