Epson C11C605001 Reference Guide - Page 94
Changing the settings in SelecType mode, Tear Off, Top of Form, Pitch, Print Settings, Top - test page
UPC - 010343853614
View all Epson C11C605001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Changing the settings in SelecType mode The following table shows the basic functions for the control panel buttons while you are in SelecType mode. Button Basic function Tear Off and Top of Form Enters or exits SelecType mode. (Menu) buttons ItemU (Font) button Selects the previous menu parameter. ItemD (Pitch) button Selects the next menu parameter. SetU (Tear Off) button Selects the previous value in the selected menu. SetD (Top of Form) button Selects the next value in the selected menu. Follow these steps to enter SelecType mode and change the settings: 1. Make sure paper is loaded. 2. Press the Menu buttons (Tear Off and Top of Form) to enter SelecType mode. The LCD displays the currently selected language. 3. If the language you want is not selected, press the SetU (Tear Off) or SetD (Top of Form) button until the LCD displays the language you want. 4. Press the ItemD (Pitch) button to set the desired language. Note: The language you select is also used for other settings, modes, and test printouts, such as Default-setting mode and printing a Hex Dump. 5. You see Print Settings on the LCD. Press the SetD (Top of Form) button to print the current settings. 94 Control Panel