Epson C823622 Administrator's Manual - Page 115

Chap 8-Using the Ethernet Card with OS/2, Overview, Applicable systems, Overall steps

Page 115 highlights

Chapter 8 Using the Ethernet Card with OS/2 This chapter explains how to configure and use the Ethernet card with an IBM OS/2 network. The instructions in this chapter are valid for OS/2 Warp 3 and Warp 4 (OS/2 Warp Connect and OS/2 Warp Server). Overview Applicable systems t OS/2 Warp 3, OS/2 Warp 4 t lprportd (TCP/IP) of Warp t Shared printer It is necessary to install the IBM OS/2 NetBIOS protocol. Overall steps Follow these basic steps for using the Ethernet card with OS/2. Go to the indicated chapters for more information. 1. Install TCP/IP protocol or NetBEUI protocol if necessary. 2. Set the IP address using the arp command. See Chapter 3. 3. Configure the Ethernet card for printing. See this chapter. Using the Ethernet Card with OS/2 8-1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199

Using the Ethernet Card with OS/2
8-1
Chapter 8
Using the Ethernet Card with OS/2
This chapter explains how to configure and use the Ethernet card with
an IBM OS/2 network. The instructions in this chapter are valid for
OS/2 Warp 3 and Warp 4 (OS/2 Warp Connect and OS/2 Warp
Server).
Overview
Applicable systems
OS/2 Warp 3, OS/2 Warp 4
lprportd (TCP/IP) of Warp
Shared printer
It is necessary to install the IBM OS/2 NetBIOS protocol.
Overall steps
Follow these basic steps for using the Ethernet card with OS/2. Go to
the indicated chapters for more information.
1.
Install TCP/IP protocol or NetBEUI protocol if necessary.
2.
Set the IP address using the arp command. See Chapter 3.
3.
Configure the Ethernet card for printing. See this chapter.