Epson C823622 Administrator's Manual - Page 53
Using the Ethernet card in Remote Printer mode, Primary file server name, Password, Print server name
![]() |
View all Epson C823622 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Primary file server name: Select the server where you created the queue. Password: Type any new password up to 19 characters. The characters you enter appear as "V". You can also leave this space blank. Print server name: Type any new name up to 47 characters. The default name is shown below. (Printer name) - (last 6 digits of the serial number) for example: EPL-N2000-PRIFNW Polling interval: Set the polling time from 5 to 90 seconds. 6. Click OK to save changes. If the message "Configuration is successfully done" appears on your screen, the update is complete. c Caution: Once you make changes to the Ethernet card, you must wait until it registers the settings before turning off the printer. 7. Select the Connection Information in File Server Console's MONITOR.NLM, and check if the print server name assigned to the Ethernet card is logged in to the Active Connections list. It takes up to five minutes to complete this. Using the Ethernet card in Remote Printer mode The following sections describe how to configure the Ethernet card in Remote Printer mode. Creating print queues in a file server 1. From any NetWare client, log in to the network with supervisor privileges. Using the Ethernet Card with NetWare 4-9
![](/manual_guide/products/epson-c823642-administrators-manual-1b40f45/53.png)