Epson C823622 Administrator's Manual - Page 47
Using NetWare 3.1x, Notes about using NetWare 3.1x, Using the Ethernet card in Print Server mode
View all Epson C823622 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Standby mode (factory default): Standby is the default mode. With this mode, all NetWare related functions are disabled. Note: Do not use Standby mode when using the Ethernet card in a NetWare environment. Using NetWare 3.1x Follow these instructions to set up your Ethernet card for use with NetWare 3.1x. Notes about using NetWare 3.1x t Environment conflicts When you print a text file using the NetWare NPRINT command or DOS redirection, misconversion or a gap in characters might occur depending on the client environment. t PCONSOLE limitation You cannot use the Print Server status display control in PCONSOLE to set up the Ethernet card in Print Server mode. t Time required to recognize the Ethernet card It takes up to two minutes for the NetWare server to recognize the Ethernet card after turning on the printer. During this startup time, EPSON Net!2 and the status sheet do not show the correct information. Using the Ethernet card in Print Server mode The following sections describe how to configure the Ethernet card in Print Server mode. Using the Ethernet Card with NetWare 4-3