Epson C823622 Administrator's Manual - Page 21
Base2 connector C82362* only, 10BaseT/100BaseTX C82363*/C82364, Connect the network cable
![]() |
View all Epson C823622 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
2 Connect the network cable Once the Ethernet card is installed in your printer, attach the network cable. The card automatically detects which kind of cable is attached. 10Base2 connector (C82362* only) Connect an Ethernet thin coaxial (10Base2) cable to the card using the supplied Y-connector. 10BaseT connector (C82362* only) Connect the Ethernet twisted-pair (10BaseT) cable to the card using an RJ-45 connector. c Caution: Attach only one network cable at a time. 10BaseT/100BaseTX (C82363*/C82364*) Connect a category 5, twisted-pair Ethernet cable to the card with an RJ-45 connector. Category 5 cable should be used for both 10BaseT and 100BaseTX. DC-IN connector (C82364* only) Connect the AC adapter to the card. 3 Make printer settings using the printer's control panel Some EPSON printers require you to use the printer's control panel to select the interface you plan to use. See your printer manual for instructions on making the necessary interface settings. Note: If your printer automatically selects the interface and has been set to Auto mode, it is not necessary to make the interface settings. 4 Print a status sheet Press and hold down the status sheet button for about three seconds to print a status sheet. (Save the status sheet for reference.) If a status sheet prints, the Ethernet card has been installed correctly. Getting Started 1-5
![](/manual_guide/products/epson-c823642-administrators-manual-1b40f45/21.png)