Epson C823622 Administrator's Manual - Page 19

Hardware Installation, Install the Ethernet card in your printer

Page 19 highlights

Hardware Installation This section explains how to install the Ethernet card in your printer. You must install the interface card in the printer, connect it to the network, and turn on the printer before you can set up the software. c Caution (for the C82363* and C82364*): Before you install the Ethernet card in your printer, make sure switch SW2 is set correctly for the card's power source. If you are using the following printers, the switch should be set to P: EPSON Stylus COLOR 1520/3000, EPL-N1200/N2000. For all other printers, the switch should be set to A. A SW2 P SW2 1 Install the Ethernet card in your printer Before installing the Ethernet card, see the section on using printer options in your printer documentation for specific instructions on installing the optional interface card. c Caution: When you install or remove the Ethernet card, you must turn off the printer and unplug the power cord from the wall outlet to prevent electric shock. 1. Turn off the printer and unplug it from the wall outlet. 2. Remove the printer's interface slot cover. Getting Started 1-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199

Getting Started
1-3
Hardware Installation
This section explains how to install the Ethernet card in your printer.
You must install the interface card in the printer, connect it to the
network, and turn on the printer before you can set up the software.
c
Caution (for the
C82363* and C82364*
):
Before you install the Ethernet card in your printer, make sure switch
SW2 is set correctly for the card’s power source. If you are using the
following printers, the switch should be set to P: EPSON Stylus
COLOR 1520/3000, EPL-N1200/N2000. For all other printers, the
switch should be set to A.
1
Install the Ethernet card in your printer
Before installing the Ethernet card, see the section on using printer
options in your printer documentation for specific instructions on
installing the optional interface card.
c
Caution:
When you install or remove the Ethernet card, you must turn off the
printer and unplug the power cord from the wall outlet to prevent
electric shock.
1.
Turn off the printer and unplug it from the wall outlet.
2.
Remove the printer’s interface slot cover.
A
P
SW2
SW2