Epson C823622 Administrator's Manual - Page 131
Using Subnet Settings
![]() |
View all Epson C823622 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Time-out time: Use this to set the time-out for communication with the Ethernet card(s). You can choose a value between 3 and 99 seconds. (The default value is 15 seconds.) Note: When the network is large and many Ethernet cards are used, a longer time-out is recommended. NetWare effective hops: Set the number of hops you can take to get to the Ethernet card when searching for printer information. All cards within this number of hops are identified and listed in EPSON Net!2. You can set the number of hops from 0 to 15. (The default value is 3.) c Caution: Set the smallest value necessary for the number of hops. If you set a large number of hops, many search packets are generated, causing excess network traffic. If you use a dial-up router, account faults may be caused by passing search packets through the line. Using Subnet Settings Use these settings when you want to get the interface card's information for another segment on the network. See Chapter 3. I tem Subnet Subnet List box Add button Delete button Ex planation Type the subnet address you want to search (0 to 255). The interface cards in the subnet address you added to the Subnet box are searched and are listed on the EPSON Net!2 dialog box. Adds the subnet address to the Subnet List box. Deletes the subnet address from the Subnet List box by selecting the subnet address and then clicking the Delete button. Using EPSON Net!2 and the Ethernet Card Home Page 10-3
![](/manual_guide/products/epson-c823642-administrators-manual-1b40f45/131.png)