Epson C823622 Administrator's Manual - Page 125
Setting up for HP-UX 9.05 or later
![]() |
View all Epson C823622 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Setting up for HP-UX 9.05 or later In the following steps, substitute the name you will use to configure your printer's Ethernet card on the network for HOSTNAME. Substitute the printer name that users will send print jobs to for Rprinter. 1. Add the IP address and host name to the /etc/hosts file. For example: 22.33.44.55 HOSTNAME 2. Terminate the printer service. For example: lpshut 3. Create the printer. For example: lpadmin -pRPrinter -v/dev/null -mrmodel -ormHOSTNAME -orpaux 4. Restart the print service. For example: lpshed 5. Enable the printer for use. For example: accept Rprinter enable Rprinter Use the lp command to print. For example: lp -DRPrinter Print-File-Name Using the Ethernet Card with UNIX 9-5
![](/manual_guide/products/epson-c823642-administrators-manual-1b40f45/125.png)
Using the Ethernet Card with UNIX
9-5
Setting up for HP-UX 9.05 or later
In the following steps, substitute the name you will use to configure
your printer’s Ethernet card on the network for HOSTNAME.
Substitute the printer name that users will send print jobs to for
Rprinter.
1.
Add the IP address and host name to the /etc/hosts file.
For example:
22.33.44.55 HOSTNAME
2.
Terminate the printer service.
For example:
lpshut
3.
Create the printer.
For example:
lpadmin -pRPrinter -v/dev/null -mrmodel
-ormHOSTNAME -orpaux
4.
Restart the print service.
For example:
lpshed
5.
Enable the printer for use.
For example:
accept Rprinter
enable Rprinter
Use the lp command to print.
For example:
lp -DRPrinter Print-File-Name