Epson C823622 Administrator's Manual - Page 29
Chap 3-Setting the IP Address, Overview, Installing the TCP/IP Protocols in Your PC
![]() |
View all Epson C823622 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Chapter 3 Setting the IP Address To use the Ethernet card with TCP/IP, you first need to set its IP address. Overview Follow these general steps to set the card's IP address. See the indicated chapters for more information. 1. Install TCP/IP protocol on the operating systems, if necessary. See the section below. 2. For Windows or Macintosh, install EPSON Net!2. See Chapter 2. 3. Set the IP address using either: u The arp command (see page 3-8) u EPSON Net!2 for Windows/Macintosh (see page 3-10) Note: EPSON Net!2 cannot be used for OS/2 or UNIX. When setting the IP address for OS/2 or UNIX, use the arp command. 4. Set up the printer. See Chapters 6 through 9. Installing the TCP/IP Protocols in Your PC Before using the Ethernet card with TCP/IP, you must make sure that the TCP/IP protocol is installed on your operating system. After it is installed, you can use the computer to configure the Ethernet card for use with TCP/IP. Setting the IP Address 3-1
![](/manual_guide/products/epson-c823642-administrators-manual-1b40f45/29.png)