Epson C823622 Administrator's Manual - Page 43
TCP/IP, Manual, BOOTP, SUBMIT, RESET, button to update the settings. If you have set
View all Epson C823622 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
2. Click TCP/IP under Network on the Configuration menu to view the TCP/IP setting screen. 3. Under Get IP Address, select from the following: Manual, RARP, BOOTP, or DHCP. 4. Type the IP address, the subnet mask, and the default gateway. 5. Click the SUBMIT button to update the settings. If you have set the password, type the password to update the settings when you are prompted. 6. If the message "Configuration change is complete!" appears on your screen, the update is complete. Enable the changes by clicking RESET or turning your printer off and then on. Setting the IP Address 3-15
Setting the IP Address
3-15
2.
Click
TCP/IP
under Network on the Configuration menu to view
the TCP/IP setting screen.
3.
Under Get IP Address, select from the following:
Manual
,
RARP
,
BOOTP
, or
DHCP
.
4.
Type the IP address, the subnet mask, and the default gateway.
5.
Click the
SUBMIT
button to update the settings. If you have set
the password, type the password to update the settings when you
are prompted.
6.
If the message “Configuration change is complete!” appears on
your screen, the update is complete. Enable the changes by
clicking
RESET
or turning your printer off and then on.