Epson C823622 Administrator's Manual - Page 83

Using a print server at a dial-up destination (remote) t When the power is turned on The computer dials out because access is made to a local file server first and then to a primary server. There is no problem since this occurs only once at power on. t When the Ethernet card is not set up correctly The computer dials out because access is made to a local file server first and then to a primary server. It dials out repeatedly at intervals of approximately 5 minutes. Use the correct Ethernet card settings to avoid this phenomenon. t During normal operation (standby) An SPX Watchdog packet is sent according to the NetWare protocol convention. Use a router with a vicarious response function to avoid dialing out unintentionally. t During normal operation (printing) The computer dials out while the print data is being transferred. t When the primary server is down during printer operation The computer dials out because connection to the primary server is attempted periodically. Since this is attributable to the automatic re-connection function, turn off the printer until the primary server is restored. Using the Ethernet Card with NetWare 4-39