Epson C823622 Administrator's Manual - Page 22
Initializing the Ethernet Card, Caution
![]() |
View all Epson C823622 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
c Caution: u After turning off the printer, wait until the status lights go out before turning it back on; otherwise, the Ethernet card may not reset correctly. u Wait until the status lights go out before pulling the card out of the printer; otherwise, the Ethernet card may not reset correctly. Note: u If the printer does not print the status sheet, first make sure that the printer is online, then wait a minute. If it still does not print the status sheet, turn off the printer and wait until the status lights go out. Then turn it on again and retry the status sheet. u Some printers take more than 30 seconds to initialize the card. Initializing the Ethernet Card You must initialize the Ethernet card under the following circumstances: u If you move the card to another printer u When there is an error communicating with the Ethernet card Note: You can also initialize the Ethernet card using EPSON Net!2. See Chapter 10 for more information. Follow these steps to initialize the Ethernet card: 1. Turn off the printer. It will take several seconds for the Ethernet card to power down. Wait until the status lights on the card go out before continuing with step 2. 1-6 Getting Started
![](/manual_guide/products/epson-c823642-administrators-manual-1b40f45/22.png)