Epson C84WN Printer Basics - Page 47
Replacing an Empty or Low Ink Cartridge, also begins to flash.
UPC - 010343849143
View all Epson C84WN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Replacing an Empty or Low Ink Cartridge Be sure you have a new ink cartridge before you begin. Once you start the ink cartridge replacement procedure, you must complete all the steps in one session. Follow these steps to replace ink cartridges when the red ink out light is flashing or on: 1. Make sure the printer is turned on and not printing. The power light should be on, but not flashing. 2. Lower the output tray and open the printer cover. 3. Press the ink button for one second. The print head moves to the left, and the cartridge that needs to be replaced stops under the mark. The power light also begins to flash. Caution: Don't press the ink button for more than 2 seconds, or the printer will start to clean the print head. To avoid damaging the printer, never move the print head by hand. 4. Press the ink button again. ■ If more than one ink cartridge is empty, the next cartridge moves under the mark. This happens after you press the ink button for every ink cartridge that needs to be replaced. 47