Epson ELP-5500 User Manual - Page 125
lamp failure., Placing the projector in this position keeps dust - replacement bulb
UPC - 010343820371
View all Epson ELP-5500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
✦ Warning: Let the lamp cool before replacing it. Also, do not touch the glass portion of the lamp assembly; this can cause premature lamp failure. 1. Turn off the projector and unplug the power cord from the electrical outlet and the projector. Wait at least 20 minutes for the bulb to cool. 2. Place the projector on its side with the handle at the top so you can easily access the lamp cover. Note: Placing the projector in this position keeps dust from getting inside the projector housing. 3. Use a screwdriver, coin, or similar object to loosen the retaining screw on the lamp cover. When the screw is loose, lift off the lamp cover. (You cannot remove this screw from the cover.) 2 1 Replacing the Lamp 113
Replacing the Lamp
113
Warning:
Let the lamp cool before replacing it. Also, do not touch
the glass portion of the lamp assembly; this can cause premature
lamp failure.
1.
Turn off the projector and unplug the power cord from the
electrical outlet and the projector. Wait at least 20 minutes for
the bulb to cool.
2.
Place the projector on its side with the handle at the top so you
can easily access the lamp cover.
Note:
Placing the projector in this position keeps dust from
getting inside the projector housing.
3.
Use a screwdriver, coin, or similar object to loosen the retaining
screw on the lamp cover. When the screw is loose, lift off the
lamp cover. (You cannot remove this screw from the cover.
)
2
1