Epson ELP-5500 User Manual - Page 34
with the projector to the laptop's mouse port., Connect the other end of the PS/2 mouse cable to
UPC - 010343820371
View all Epson ELP-5500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
2. If you want to use the remote control as a mouse pointer for the laptop, connect the mouse cable. Note: If you'll be using the optional ELP Link III software, skip step 2, as you'll need to connect the mouse cable included in the ELP Link III set instead. Follow the instructions on page 80 to connect the mouse cable. Mouse/Com port PS/2 mouse cable a. Connect the small end of the PS/2 mouse cable included with the projector to the laptop's mouse port. Note: You'll need the optional ELP Link III set to connect the projector to a laptop with a serial mouse. See Chapter 4 for more information. b. Connect the other end of the PS/2 mouse cable to the projector's Mouse/Com port. Connecting to a Computer 25
Connecting to a Computer
25
2.
If you want to use the remote control as a mouse pointer for the
laptop, connect the mouse cable.
Note:
If you’ll be using the optional ELP Link III software, skip
step 2, as you’ll need to connect the mouse cable included in the
ELP Link III set instead. Follow the instructions on page 80 to
connect the mouse cable.
a.
Connect the small end of the PS/2 mouse cable included
with the projector to the laptop’s mouse port.
Note:
You’ll need the optional ELP Link III set to connect
the projector to a laptop with a serial mouse. See Chapter 4
for more information.
b.
Connect the other end of the PS/2 mouse cable to the
projector’s Mouse/Com port.
PS/2 mouse cable
Mouse/Com
port