Epson S60600 User Manual - Page 55
Take Up with the Printable-Side-Out
View all Epson S60600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Note: Make sure the media is taut; otherwise it may not be taken up correctly. Parent topic: Using the Auto Take-up Reel Take Up with the Printable-Side-Out After attaching the roll core on the auto take-up reel, follow these steps to take up media with the printable side out. 1. Cut a strip about 27.6 inches (70 cm) long from the included paper tape and attach one end to the center of the media using adhesive tape. 1 27 inches (70 cm) Note: You can also use commercially available tape or strips cut from media to attach your media to the roll core. The paper tape or cut media strip should be about 0.8 to 1 inch (20 to 25 mm) wide and 27.6 inches (70 cm) long. 55
Note:
Make sure the media is taut; otherwise it may not be taken up correctly.
Parent topic:
Using the Auto Take-up Reel
Take Up with the Printable-Side-Out
After attaching the roll core on the auto take-up reel, follow these steps to take up media with the
printable side out.
1.
Cut a strip about 27.6 inches (70 cm) long from the included paper tape and attach one end to the
center of the media using adhesive tape.
1
27 inches (70 cm)
Note:
You can also use commercially available tape or strips cut from media to attach your media to
the roll core. The paper tape or cut media strip should be about 0.8 to 1 inch (20 to 25 mm) wide and
27.6 inches (70 cm) long.
55