Fluke 8808A User Manual - Page 57

3 Operating the Meter from the Front Panel List and Number Editors Using the List Editor The list editor is used to select the options described in Table 3-7. You may abort an edit and return to normal operation at any time by pressing Q. To use the list editor: 1. Select the option list that you want to edit by pressing the applicable button(s) as indicated in Table 3-7. The option list type is shown in the secondary display and the associated options are shown in the primary display. 2. Press Uor V to step through the options. (Hold either button to scroll through the options.) As you step through the list, only the selected option is shown in normal intensity (bright) while the others are dim. 3. When the desired option is shown, press R to select it. The selected option is then displayed in normal intensity (bright). Table 3-7. List Editor Options To Set Touch Hold minimum response level Buttons Q then I RS-232 print-only mode (if RS-232 interface is selected) K RS-232 baud rate Q then K Data bits Parity options Trigger mode Stop bit Echo mode Q then J Options 1 = 0.1 % of reading 2 = 1 % of reading 3 = 5 % of reading 4 = 10 % of reading 0,1,2,5,10,20,50,100, 200, 500,1000,2000, 5000,10000,20000, or 50000 300,600,1200,2400, 4800, 9600, or 19200 8 7 E = Even Odd = Odd No = None 1 2 On Off 1, 2, 3, 4, 5 Annunciator HoLd Print baud data Par StoP Echo tri 3-23