Fluke 8808A User Manual - Page 86
RS-232 Save / Recall System Configurations, Table 4-17. Remote/Local Configuration Commands, Command
View all Fluke 8808A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
8808A Users Manual Command REMS RWLS LOCS LWLS Table 4-17. Remote/Local Configuration Commands Description Puts the Meter into remote (REMS) state mode without front panel lockout. r is shown on the display. Puts the Meter in remote with lockout state (RWLS) with front panel lockout. r and L are shown on the display. When in RWLS, all front panel buttons are disabled. Puts the Meter is local state (LOCS) mode without lockout. All front panel buttons are enabled. Puts the Meter in local with lockout state (LWLS) mode. All front panel buttons are disabled. L is shown on the display. RS-232 Save / Recall System Configurations Table 4-18 describes RS-232 save/recall system configuration commands, which are used with the RS-232 interface to set up the remote/local configuration of the Meter. Command Save Call Table 4-18. Save / Call System Configuration Commands Description Saves the current running working status into , where is 1 through 6. Recalls the working status from , where is 1 through 6. 4-26